5 CO200-EU-EN-V1.1-11/11
P1.
3
CO
2
ALARM: BEEP ALARM
P1.
3
is used for setting the CO
2
upper limit for the BEEPER ALARM level. The current
set
value will be blinking on the display.
Press the
▲
or MIN/MAX
▼
button to increase or decrease the value. Each press adjusts in
100ppm increments. The alarm range is 1000 to 5000ppm.
When the value has been set, press the SET button to confirm the limit and to proceed to
P1.
0.
Press the ESC button to exit without saving the setting.
P2.
0
TEMPERATURE SCALE
Press the
▲
button in P1.
0
mode to access P2.
0
for setting the temperature scale.
Press the SET button to go into the P2.1setting mode. The °C or °F will blink.
Press the
▲
button to change the units. Press the SET button to confirm theton.etting or
press the ESC button to exit without saving and return to P2.
0
.
P3.
0
REAL TIME CLOCK
Press the
▲
button in P1.
0
twice to access P3.
0
for setting up real time clock. Press the
SET button and the meter goes into P3.
1
with blinking year in the lower left display. To
change the year, press the
▲
button or the MIN/MAX
▼
button. Press the SET button to
save the setting and then enter P3.
2
or press the ESC button return to P3.
0
without saving
the setting.
Press the
▲
button P3.
1
to access P3.
2
. The current month setting will blink. To change
the month, press the
▲
button or the MIN/MAX
▼
button. Press the SET button to save the
setting and then enter P3.
3
or press the ESC button return to P3.
0
without saving the
setting.
Repeat as above to finish the setting of P3.
3
(Date), P3.
4
(Hour) and P3.
5
(Minute)
