SAFETY INFORMATION
A
WARNING
identifies conditions and actions that may cause hazard(s) to the user;
A
CAUTION
identifies conditions and actions that may damage this Device.
Table-1 International Electrical Symbols
AC - Alternating Current
DC - Direct Current
AC and DC - Alternating and Direct Current
Ground
Double Insulation
See Explanation In The Manual
To avoid electric shock, injury, or damage to this instrument:
•
Read this operation manual completely before using this device and follow all safety
instructions.
•
This device is for indoor use, altitude up to 2,000m.
•
Avoid working alone.
•
Use the device only as specified in this manual; otherwise, the protection provided by the
meter may be impaired.
•
Never measure Voltage when the current measurement is selected.
•
Do not use this device if it looks damaged.
•
Inspect the leads for damaged insulation or exposed metal. Replace damaged leads.
•
Disconnect the power and discharge all high-voltage capacitors before testing in the
resistance, continuity, and diode function.
•
Use caution when working above 70V DC or 33V RMS and 46.7V peak, these voltages
may cause a shock hazard.
•
Always keep your hands behind the protective guard of the probe when measuring.
•
Select the proper function and disconnect the test leads from test points before changing
functions.
•
Do not mix with different types of batteries. Always use specified battery.
•
The meter is safety-certified in compliance with EN61010 (IEC 1010-1, IEC 1010-2-031)
Installation Category
ΙΙ
250V Pollution Degree 2.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
