CG204-EU-EN V2.1 3/11
12
PC Interface
The supplied USB port, USB connection cable, and PC software allow the user to connect
the meter to the PC and remotely view and save readings and statistics. Please refer to
the software guide on the supplied CD-ROM for more details.
Error Messages
The following error messages will appear on the meter’s LCD if a problem arises.
Err1: Eddy current probe error
Err2: Magnetic induction probe error
Err3: Eddy current and Magnetic induction errors
Err4, 5, 6: Unused error displays
Err7: Thickness error
Please contact Extech Instruments if a problem exists.
Maintenance
Cleaning and Storage
Periodically wipe the meter housing with a damp cloth and mild detergent; do not use abra-
sives or solvents. If the meter is not to be used for 60 days or more, remove the batteries
and store them separately.
Battery Replacement/Installation instructions
1. Remove the Phillips head screw that secures the rear battery door
2. Open the battery compartment
3. Replace/install the two 1.5V ‘AAA’ batteries
4. Secure the battery compartment
You, as the end user, are legally bound (
Battery ordinance
) to return all used
batteries and accumulators;
disposal in the household garbage is prohibited!
You can hand over your used batteries / accumulators at collection points in your
community or wherever batteries / accumulators are sold!
Disposal:
Follow the valid legal stipulations in respect of the disposal of the
device at the end of its lifecycle
www.burntec.com
