461880 V2.2 8/09
5
Powering the meter
1.
Press
the
POWER
key once to power the meter On. The meter will perform a short
self-test.
2.
Press and hold the
POWER
key to power the unit Off. The unit will beep and display
OFF.
Selecting Units
1.
The unit powers on in Acceleration mode and in the units last used.
2.
Use the UNIT/LOGGER key to scroll through the other available functions/units.
3.
To change displayed units (Metric or Imperial), press and hold the
UNIT/LOGGER
key for 2 seconds.
RMS, PEAK, PEAK MAX HOLD, MAX HOLD
Press the
FUNCTION/SEND
key to select RMS, PEAK, or PEAK MAX HOLD (ACC and
VEL); or PEAK or PEAK MAX-HOLD (DISP).
1.
RMS - Typical selection for vibration measurements. (PEAK to PEAK for
Displacement)
2.
PEAK – For measurement of the peak value. Not available in the Displacement mode.
3.
PEAK MAX HOLD – Holds and displays the maximum value. The display will update
only when a new maximum is measured. Not available in the Displacement mode.
4.
MAX HOLD – Holds and displays the maximum Peak to Peak value. Available in
Displacement mode only.
5.
To clear the MAX HOLD or PEAK MAX HOLD values, press the
HOLD/ESCAPE
key
for more than 2 seconds. This will zero the display and restart the MAX HOLD or
PEAK MAX HOLD function.
DATA HOLD
To freeze the LCD display, momentarily press the
HOLD/ESC
key. The HOLD icon will
appear on the upper right-hand corner of the LCD. Momentarily press the
HOLD/ESC
key
again to return to normal operation (the HOLD' hold icon will disappear).
MAX/MIN Record Function
1.
Press
the
REC
key to enter the MAX/MIN record mode. The REC icon will appear on
the display. Subsequent presses of the Record key will select the Max or MIN record
mode. Press and hold the
RECORD
key for more than 2 seconds.
2.
To delete the MAX/MIN recorded values, press the
HOLD
button while the MAX/MIN
value to be erased is on the display. The value will be erased and the MAX or MIN
icon will disappear. The unit will remain in Record mode until the
REC
key is held for
more than 2 seconds.
www.bigfoottrade.kz
