background image

Model 407764 Version 1.4  December 2004 

10

 

Support Hotline (781) 890-7440 

Tech support: Ext. 200; Email: [email protected] 

Repair/Returns: Ext. 210; Email: [email protected] 

Website: www.extech.com 

Calibration / Repair Services 

Extech offers complete repair and calibration services for all of the products we sell. For 
periodic calibration, NIST certification or repair of any Extech product, call customer service for 
details on services available. Extech recommends that calibration be performed on an annual 
basis to insure calibration integrity.

 

Warranty 

EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts 
and workmanship for one year from date of shipment (a six month limited warranty applies on 
sensors and cables). If it should become necessary to return the instrument for service during or 
beyond the warranty period, contact the Customer Service Department at (781) 890-7440 ext. 210 
for authorization or visit our website at www.extech.com  (click on Contact Extech and go to Service 
Department to request an RA number). A Return Authorization (RA) number must be issued before 
any product is returned to Extech. The sender is responsible for shipping charges, freight, insurance 
and proper packaging to prevent damage in transit. This warranty does not apply to defects resulting 
from action of the user such as misuse, improper wiring, operation outside of specification, improper 
maintenance or repair, or unauthorized modification. Extech specifically disclaims any implied 
warranties or merchantability or fitness for a specific purpose and will not be liable for any direct, 
indirect, incidental or consequential damages. Extech's total liability is limited to repair or 
replacement of the product. The warranty set forth above is inclusive and no other warranty, whether 
written or oral, is expressed or implied. 

 

 

 

 

 

 

Copyright 

©

 2004 Extech Instruments Corporation. All rights reserved 

including the right of reproduction in whole or in part in any form.

 

Summary of Contents for 407764













Reviews: