Extech Instruments 407706 User Manual Download Page 7

 

Warranty 

EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for one year 

from date of shipment (a six month limited warranty applies on sensors and cables). If it should become necessary to return the 

instrument for service during or beyond the warranty period, contact the Customer Service Department at (781) 890-7440 for 

authorization. A Return Authorization (RA) number must be issued before any product is returned to Extech. The sender is 

responsible for shipping charges, freight, insurance and proper packaging to prevent damage in transit. 

This warranty does not apply to defects resulting from action of the user such as misuse, improper wiring, operation outside of 

specification, improper maintenance or repair, or unauthorized modification. Extech specifically disclaims any implied warranties or 

merchantability or fitness for a specific purpose and will not be liable for any direct, indirect, incidental or consequential damages. 

Extech's total liability is limited to repair or replacement of the product. 

The warranty set forth above is inclusive and no other warranty, whether written or oral, is expressed or implied. 

Copyright 

©

 2000 Extech Instruments Corporation. 

All rights reserved including the right of reproduction 

in whole or in part in any form.

 

407760    V1.2   10/00 

Summary of Contents for 407706








Reviews: