Model 382068 V3.0 4/2005
21
4
5
6
7
2 3
1
8
9
10
Connecting the meter to a PC
The Model 382065 includes an attachment that affixes to the bottom of the meter via its
banana jacks. The PC interface cable is hardwired to this attachment. Connect the other
end (DB-9) of the cable to an available PC com port.
Operation
Software Setup
1.
Start Windows® and close all applications.
2.
Insert the supplied program disk in the CD-ROM drive.
3.
The Setup program will run automatically.
Starting the Clamp Meter Software
1.
Click the Windows® START button.
2. Select
PROGRAMS.
3. Select
CLAMPMETER.
4.
Double click the CLAMPMETER icon.
5.
Click on the appropriate COM port when prompted.
6.
The Main Software Screen will appear (see below).
Main Software Screen
1. GRAPH button – Press to view
real-time data in x-y plot format.
2. LIST button – View data in list
format as it’s recorded.
3. TIME SET button – Press to allow
the PC system time to be used by
the meter (reflected in the TIME
window - item 8)
4. MEMORY button – Open Memory
window (see subsequent section).
5.
Meter Remote Display
6. Sampling Rate – The rate at which
data is recorded while the meter is
connected to the PC.
7. OPEN FILE button – Open a
previously saved data file.
8. TIME – Shows the time from item
3 above.
9.
SAVE AS – Click to open new data
file in which to record.
10. Communication Status – COM1 or
COM2 will display when
connection is good. NO COM will
appear if communication is faulty.
www.burntec.com