Extech Instruments 381395 User Manual Download Page 38

Page: 38 / 67

4. Using the Data Logger

Model 381395 Version 1.0 January 2008

4-2

Set the item

Exit

PATH:

4.1.2. Change the Sampling Interval Time

Example: Set the sampling interval time from 1Sec to 10Sec.

Use the arrow keys to highlight S/Time (Sec).

Press

key to change the Edit mode.

[Ex-1] S/Time (Sec): 00001

•

Press

key to increase,

key to decreases the highlighted

digit. [Ex-2] S/Time (Sec): 00000

Move the Cursor to highlight the most significant digit.
[Ex-2] S/Time (Sec): 00000

•

Press

key to increase,

key to decreases the highlighted

digit. [Ex-3] S/Time (Sec): 00010

Exit

PATH:

4.1.3. Change the Start/Stop Address

Example: Set the Start address from 10001 to 12001.

Use the arrow keys to highlight Sampling Time or Start/Stop Address.

Press

key to switch to the Edit mode.

[Ex-1] START ADD: 10001

Move the Cursor to highlight the most significant digit.
[Ex-2] START ADD: 10001

•

Press

key to increase,

key to decreases the highlighted digit.

[Ex-3] START ADD: 12001

Exit

PATH:

Summary of Contents for 381395




































































Search results

Summary of Contents for 381395

Reviews:

Related manuals for 381395

Brands by name

Popular brands

Extech Instruments 381395, User Manual

Search results

Summary of Contents for 381395

Reviews:

Related manuals for 381395

Brands by name

Popular brands