380946 4/01 Rev. 1.0
Panel Description
1 Transformer
jaw
2 Jaw
trigger
3
On/Off and range selection switch
4 Zero
button
5 Power-On
LED
6
Low battery LED
7 Output
terminals
Current Measurements
1.
Set the DMM to the mV or low voltage range (ACV for AC measurements or DCV
for DC measurements).
2.
Determine the highest anticipated reading and set the range accordingly. Start
with the 30A range if unsure.
3.
Connect the RED connector lead to the multimeter’s '+' Voltage
terminal and the BLACK lead to the '-' Common terminal.
4.
For DC measurements, hold the adaptor in the same
orientation as it will be held during the measurement and press
the Zero button (No conductor in the jaw).
5.
Press the Jaw Trigger to open the jaw and clamp around a
single conductor.
6.
Read the Current on the DMM display.
.
1
2
3 4 5 6
7
Yes
No
