background image

 

 
User's Guide 

 
 
 
 
 

Oyster pH - Conductivity - TDS - Temperature Meters 
 
Models  
34135-A 
341350 
341350-P 
34145A 
341450 
341450-P 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

INTRODUCTION 

 
Congratulations on your purchase of the Extech's Oyster Series meter or meter kit. These 
devices measure pH/Conductivity plus TDS or Temperature. These meters are intended for 
routine laboratory and field testing. Accurate measurements are provided in a battery 
operated, portable meter with a hinged display that can be adjusted to any viewing angle. 
 

Model 34135-A

 measures pH, Conductivity and TDS. The ‘A’ indicates ‘meter-only’.  

Models 341350 and 341350-P

 are kits which include the 34135A and all the necessary 

accessories. The ‘P’ indicates Polymer type electrode (341350 has glass electrode). 
 

Model 34145-A

 measures pH, Conductivity & Temperature. ‘A’ indicates ‘meter-only’. 

Models 341450 and 341450-P

 are kits which include the 34145A and all the necessary 

accessories. The ‘P’ indicates Polymer type electrode (341450 has glass electrode). 

 

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

FAX 781.665.0780 - TestEquipmentDepot.com 

 

99 Washington Street 
Melrose, MA 02176 

Phone

 781-665-

1400

Toll Free 1-800-517-8431

 

Visit us at www.T

estEquipmentDepot.com

Back to the 

Extech 341350

 Product Page

Summary of Contents for 34135-A






Reviews: