EXT Racing Shox ARMA V3, Service Manual

Page: 36 / 54

Service manual Arma v3 / Storia v3 [V1.5]
#9 - For ARMA: Ful-
ly screw the HBC adjuste-
ment. Using a pickup tool
remove the circlip then re-
move the HBC jet. Clean,
change the seal (previou-
sly lubricated with red
gel) and, using some red
gel, put back in position
spring and ball. Assembly
the adjuster back in ful-
ly close position. Assem-
bly the circlip and then
unscrew the HBC adjuste-
ment to accomodate the
circlip in the housing.
ˆ PickUp tool
ˆ Red adhesive
gel
#10 - Degrease the main
shaft and clamps. Posi-
tion the shaft assembly in
vertical position as the -
gure and using a 6mm al-
len key remove spec-nut.
Remove the main piston
and the spec, store them
in a clean tray.
ˆ TL0326
ˆ Allen key
6mm
ˆ Clean tray
#11 - Use TL0425 to un-
screw the piston holder.
To solve the Loctite, heat
the thread zone to 200°C
using an industrial heater.
Remove the piston holder
and the rebound needle.
ˆ TL0425
ˆ Industrial
heater
ˆ Clean tray
34