14
English
EX-41016-2WO
6. Driver Installation
CHECK THE INSTALLED DRIVER
Click at >
Start
< >
Programs
< >
Administrative Tools[Common]
< >
Windows NT-
Diagnostics
< then click at >
Resource
< >
IRQ
<. Here you should find the entry
„09
o 0 PCI“
. Then click at >
I/O-Port
< here you should see the entries „
D400-D407
sysbase 0 PCI“ „D800-D802 sysbase 0 PCI
“ and
„DC00-DC1F sysbase 0
PCI“
for the ports. The I/O addresses can change depends which system and card is
installed. If you see these or similar entry's the card is installed correctly.
SCO UNIX / LINUX
The drivers are located in the following folder on our driver CD:
"D:\IO\SYSTEMBASE\DRIVERS\PCI\SCO"
Because each individual distribution and kernel version of Linux is different, sadly we
cant provide a installation instruction. Please refer to the installation manual for stand-
ard IO ports from your Unix/Linux version! In some newer versions of Linux the card will
even be installed automatically after starting Linux.
7. Technical Information
Power Requirement:
3,3V/900mA
Operating Temperature:
0 to 55°C (32 to 132°F)
Storage Temperature:
-20 to 85°C (-4 to 185°F)
Rel. Humidity:
5 to 95% RH
Baud Rate:
110bps to 921.6Kbps
Data Bits:
5, 6, 7, 8, 9
Stop Bits:
1, 1.5, 2
Parity:
None, Even, Odd, 1, 0
Flow Control:
RTS/CTS, XON/XOFF
RS-232 Signals:
TXD, RXD, RTS, CTS, DTR, DSR, DCD, RI, GND
Size:
146 x 56mm
Weight:
200g
Summary of Contents for EX-41016-2WO
Page 1: ...Anleitung Vers 1 0 28 10 15 RS 232 PCI Karte mit 16 x 9 Pin Anschluss EX 41016 2WO Manual...
Page 15: ......
Page 16: ......
