13
EX
-
1504HMS
English
Because there are large differences between PC
’
s, we can give you only a general in-
stallation guide. Please refer your computer
’
s reference manual whenever in doubt.
1.
Install the EX
-
1504HMS to the wall or to a DIN
-
Rail if required
2.
Connect the USB cable to the USB B
-
Port at the Hub.
3.
Connect the optional power supply into the Terminal Block at the Hub.
4.
Now connect the other end from the USB cable (A
-
Plug) to the A
-
Port at your PC.
© Copyright 2020 by EXSYS Vertriebs GmbH. All Rights Reserved
4. Hardware Installation
5. Driver Installation
All Operating Systems
After the hardware installation the OS will recognize the device automatically and install
the drivers.
CHECK INSTALLED DRIVER
Open the >
Device manager
<. Now you should see at
„
Ports (COM & LPT)
“
&
„
USB
-
Controller
“
the following new entry's:
If you see this or a similar information the device is installed correctly.
