12
English
EX
-
1012
© Copyright 2021 by EXSYS Vertriebs GmbH. All Rights Reserved
4. Hardware Installation
Attention! Please note that the EX
-
1012 does NOT support the hot
-
plug function via the
USB
-
C expansion cable. You can NOT connect or disconnect the expansion cable if you do
not turn off your PC system first.
Please note the following installation instructions. Since there are great differences between PC
systems, we can only give you general instructions for installing/connecting the EX
-
1012. If any-
thing is unclear, please refer to the operating instructions of your computer system.
Since both the PC system and the EX
-
1012 itself are supplied with power, you must follow the
correct ON/OFF sequence as follows:
Power Off Sequence:
First switch off your PC system and then the EX
-
1012.
Power On Sequence:
First switch on the EX
-
1012 and then the PC system.
1.
Please turn off your PC system and all connected peripheral devices before installation! Also
disconnect the power plug of all devices.
2.
Now carefully remove the housing of your PC system (you may have to loosen the screws of
the housing first). Look for a free PCI
-
Express slot (see following figure).
3.
Now plug the PCIe
-
Host
-
Adapter
-
Card into a free PCI
-
Express slot. It does not matter if it is a
x1, x4, x8 or x16 slot. After plugging in, you can now screw the plate of the PCIe
-
Host
-
Adapter
-
Card to the computer case.
4.
Now you can close your computer case.
5.
Now connect one end of the USB
-
C expansion cable to the port of the PCIe
-
Host
-
Adapter
-
Card and the other end to the port of the EX
-
1012.
Summary of Contents for EX-1012
Page 15: ......
