Pearl llI H Connects to PC
2. Connect the USB connector to an available USB port on your computer and the decoder box.
You Can Select Your Source from Optical In or Analog In
3. If Select Optical In : Connect your PC and the decoder box with Optical cable.
(Decoder Box: switch to optical input)
4. If Select Analog In : Connect your PC and the decoder box with 3.5 mm audio cable.
(Decoder Box: switch to Analog input)
5. Plug round 6-pin plug (Male) from inline controller into front of the Decoder Box.
6. Slide the Optical/Analog switch on the decoder box.
After Power On PearI llI H Decoder Box , Please Check Your PC Audio Setting as Below :
1. Go to Control panel > Sounds and Audio Devices > Audio > Sound Playback > Select Your Default Audio Device
2
(Please check your microphone level when using on Windows 7 , as the level might be set to zero by default.)
. Go to Control panel > Sound and Audio Devices > Audio > Sound Recording > Select USB PnP Sound Device.
SPECIAL NOTE for PC application while connect to Optical :
1. For Watching DVD with media player, please to play by Media Player 12, or any player with AC3 filter, then the
player can send our original Dolby Digital data format to Pearl III H decoder box.
2. For playing gaming on PC, given game titles are encored with Dolby Digital, however, most game players CAN
NOT send out original Dolby Digital data format directly, but PCM, thus recommend to ON Dolby Pro Logic llx
to work with sound card or main board with Dolby Digital Live (DDL) support to have Dolby Digital format
output to Pearl III H decoder box.
12
1. Connect Pearl III H Headset with Breakaway Inline Controller Cable
Adjust Others Voice Volume by Turning the” VOL “ Volume Control
7. Power on computer and decoder box
