20
USE OF THE APPLIANCE
Display
Display
Designation
Function
0
Zero
The heating zone is activated.
1…9
Power level
Selection of the cooking level.
A
Heat accelerator
Automatic cooking
E
Error message
Electronic failure.
H
Residual heat
The heating zone is hot.
L
Locking
Control panel locking.
STARTING-UP AND APPLIANCE MANAGEMENT
Before the first use
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.
Sensitive touch
Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger
presses the key, the corresponding command is activated. This activation is validated by a
control light, a letter or a number in the display and/or a “beep” sound.
In the case of a general use press only one key at the same time.
Starting-up
You must first switching on the hob, then the heating zone:
•
Start-up/ switch off the hob:
Action
Control panel
Display
To start
Press key [
]
[ 0 ]
Touch the key
Press key [
]
Nothing or [ H ]
•
Start-up/ switch off a heating zone:
Action
Control panel
Display
Zone selection
Press key [ + ]
[ 0 ]
Increase power
Press key [ + ]
[ 1 ] to [ 9 ]
Decrease power
Press key [ - ]
[ 9 ] to [ 1 ]
Stop
Press key [ - ]
[ 0 ] or [ H ]
If no action is made within 20 second the electronics returns in waiting position.
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don’t touch the heating zones and don’t put any
heat sensitive object on them. There are risks of burn and fire.
