System Usage Conditions:
Feed Water Pressure: 20-80 PSI
Feed Water Temperature: 40-100
O
F
We recommend using a professional licensed plumber for the Whole House Filtration System Installation.
If your feed water is prone to spikes in pressure or is over 80 PSI you will need a pressure protection or
reducer valve installed before the feed water flows to the system. Always use appropriate safety measures
and methods for the installation.
Your installation must comply with all of your state and local codes. The installation area needs to be level
and dry. The system must be installed in a sheltered environment with no exposure to extreme hot or cold
weather, out of direct sunlight. Never expose the system to freezing temperatures. The system cannot be
installed upside down.
Express Water assumes no liability for the determination of the proper equipment necessary for your home.
This system does not remove biological contaminants. We recommended a UV light if your water is
biologically unsound.
Visit our website:
www.ExpressWater.com
or call us at
1-800-992-8876
to explore UV filtration options.
Copyright © 2019 by Express Water Inc.
All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any
means, including photocopying, recording, or other electronic or mechanical methods, without the prior written
permission of the publisher, except in the case of brief quotations embodied in critical reviews and certain other
noncommercial uses permitted by copyright law.
Conditions
