![Exposure OLAS Tag Testing Download Page 3](http://html.mh-extra.com/html/exposure/olas-tag/olas-tag_testing_2452401003.webp)
https://alertandfind.com/faqs
13.
A screen displaying ‘Searching’ will appear. The ‘Searching’ screen
will appear whist you remain within 10-20 metres of the point of
loss. The point of loss is the point at which the alarm is activated.
14.
Walk at least 50 paces away from the tag, simulating the vessel
moving away from the person overboard.
15.
The ‘Searching’ screen will change to an arrow pointing back to
the ‘Point of loss’. It is important to note the arrow DOES NOT track
the tag, it points back to the stored GPS location where the alarm
occurred, (Note: the accuracy of your GPS can vary depending on
your mobile device.)
16.
Follow the arrow towards the 'Point of loss'. This will be within the
same area as the switched off OLAS transmitter. The screen will
revert to ‘Searching’ when back within 20 metres.
18.
The Alarm screen will be automatically cancelled when the signal
is found again, reverting to the standby home screen.
17.
Switch the OLAS transmitter back on. On an OLAS tag press the
button for 4 seconds, you will see a green flash. On the OLAS
Float-On press the button for 4 seconds and you will see the lens
illuminate green, stop pressing the button and it will start
transmitting OLAS.
Searching…
0438
0438
170°
21m
Searching…
0438
50 Paces
Press for 4
seconds until
light briefly
flashes green
Searching…
0438
0438
Immediate
MOB
Testing the OLAS App Alarm and Recovery System