MOde
When connected via the ‘EX-
LINK’ to the MCX Pre Amplifier,
the CD input will be directly
selected when this is pressed.
MeNU
Press the ‘MENU’ button to enter the menu system. Use the
SELECT UP / SELECT DOWN buttons to select which entry you
would like to change as below:
• DIG OUT ON / OFF: Press the ‘DISPLAY’ button to select the
desired setting.
• SEL IN: This selects which input is used after mains power on.
Press the ‘DISPLAY’ button until the desired setting is reached.
• VER: Displays the current software version.
• Press ‘MENU’ again to exit.
SelecT Up and
SelecT dOWN
Use these buttons to select
the desired input.
pOWer
Use this button on the
front panel to switch the
unit from standby to ‘on’
or ‘off’.
FA-310108-MCX-CD-instruction.indd 6
1/31/2008 4:39:47 PM
