D11
EXP03C/EXP03D
EXP03C/EXP03D
Turning on/off the Transmitter power
1. Press the
[ ]
button once to power on.
2. Press and hold the
[ ]
button for 3 seconds or longer to power off.
Note:
•
When the Transmitter is powered off, iPod will be turned off as well when used
with iPod Cradle.
Automatic power off
Transmitter will be automatically powered off in the following situations:
• Three minutes of inactivity or without any connected device to conserve
energy. iPod will be turned off as well if it is connected to the Cradle.
• Battery is very low or exhausted.
Note:
• If the Transmitter is automatically shut down due to battery exhaustion, all pairing
information will be erased. Thus, it is recommended to recharge the Transmitter
when battery is low.
Activating Bluetooth
®
Audio Transmitter pairing mode
1. Make sure the Transmitter is connected to an audio source. Please refer
“
Setting Up EXP03C and EXP03D
” on page D6.
2. Set EXP03R in pairing mode. Please refer to
Bluetooth
®
Audio Transceiver
(EXP03R) owner’s manual for more details.
3. Press the
[ ]
button once to power on.
4. Press the
[ ]
button again to activate
Bluetooth
®
pairing mode.
5. Music starts streaming automatically upon successful pairing.
Basic Operations
Please make sure you have read through the chapter “
Setting Up EXP03C
and EXP03D
” on page D6 before proceed to the following operations. For
iPod/external audio player operations, please refer to your corresponding
product owner’s manual.
4. OPERATIONS FOR
Bluetooth
®
AUDIO TRANSMITTER
Summary of Contents for EXP03
