Exposure 3010S Power Amplifier Extended Set-Up
Mono Mode
When selected to the Mono mode at the back of the Exposure 3010S Power Amplifier,
both channels
are combined into one single channel with the inputs in parallel.
This allows each channel to
have the Power supply all to itself for better separation.
Note: In Mono mode, the left input socket is only used. You need to purchase another Exposure Power
Amplifier to operate in stereo. See diagram for connecting a pair of loudspeakers in mono mode.
Bi-wiring
The Exposure 3010S Power Amplifier is fitted with two sets of 4mm loudspeaker connection output sock-
ets for bi-wired connections of loudspeakers. Another pair of speaker wires is required for this operation
for each loudspeaker.
1. Ensure that the links at the speaker terminals between the high frequency and the low frequency
are removed on both loudspeakers.
2. Follow the diagram below for connecting a pair of loudspeakers in bi-wiring mode.
Please refer to the manufacturer of your loudspeakers for advice on the practicality and potential
benefits of bi-wiring.
Bi-amping Mode
The Exposure 3010S Integrated Amplifier can also be used as a pre-amplifier for the Exposure 3010S
Power Amplifier.
The Power Amplifier section of the Exposure 3010S Integrated Amplifier will still be operational, and can
be used in conjunction with the Exposure 3010S Power Amplifier in Stereo mode to provide bi-amping
capabilities for suitable loudspeakers:
1. Check your loudspeaker user manual for the wiring connections.
2. Connect the pre-out sockets on the Exposure 3010S Integrated Amplifier to the input sockets of the
Exposure 3010S Power Amplifier.
3. See diagram for connecting a pair of loudspeakers in bi-amp mode.
Your dealer or local distributor will be able to offer further advice.
Operational Modes
The Exposure 3010S Power Amplifier can be operated in one of three different modes. These are:
Stereo Mode (Factory Default)
The Exposure 3010S Power Amplifier by default is selected to Stereo mode at the back of the unit.
It operates as a conventional stereo amplifier with each channel fully independent of the other.
The majority of 3010S Power Amplifier applications will employ this mode.
Speaker Cable Compatibility
While the Exposure 3010S Power Amplifier is compatible with most types of loudspeaker cables, the
type of cables used can influence the sonic performance of your system. Please ask your Exposure dealer
for advice on loudspeaker cable compatibility and how to get the best from your Exposure 3010S Power
Amplifier.
Note: The Exposure 3010S Power Amplifier is internally protected against damage from short circuits.
However, no such protection is infallible, and damage may occur if positive and negative speaker cables are
inadvertently connected together.
Rear of Exposure 3010S Integrated Amplifier
+
L
R
PREOUT
Right
Left
-
SPK1 SPK2 SPK1 SPK2
Rear of Exposure 3010S Power Amplifier
STEREO
Right
Left
SPK1 SPK2
Right Speaker
High Frequency
Low Frequency
+
-
Left Speaker
High Frequency
Low Frequency
+
-
L
R
SPK1 SPK2
+
-
Connecting a pair of loudspeakers in Stereo mode
Right Speaker
High Frequency
Low Frequency
+
-
Left Speaker
High Frequency
Low Frequency
+
-
Rear of Exposure 3010S Integrated Amplifier
+
L
R
PREOUT
Right
Left
-
SPK1 SPK2 SPK1 SPK2
Rear of Exposure 3010S Power Amplifier
MONO
Right
Left
SPK1 SPK2
L
R
SPK1 SPK2
+
-
Rear of Exposure 3010S Power Amplifier
MONO
Right
Left
SPK1 SPK2
L
R
SPK1 SPK2
+
-
Connecting a pair of loudspeakers in Mono mode
Right Speaker
Left Speaker
Rear of Exposure 3010S Integrated Amplifier
High Frequency
Low Frequency
+
-
High Frequency
Low Frequency
+
-
+
L
R
PREOUT
Right
Left
-
SPK1 SPK2
Rear of Exposure 3010S Power Amplifier
SPK1 SPK2
STEREO
+
Right
Left
-
SPK1 SPK2
INPUT
Connecting a pair of loudspeakers in Bi-amping mode
Rear of Exposure 3010S Integrated Amplifier
+
L
R
PREOUT
Right
Left
-
SPK1 SPK2 SPK1 SPK2
Rear of Exposure 3010S Power Amplifier
STEREO
Right
Left
SPK1 SPK2
Right Speaker
High Frequency
Low Frequency
+
-
Left Speaker
High Frequency
Low Frequency
+
-
L
R
SPK1 SPK2
+
-
Connecting a pair of loudspeakers in bi-wiring mode
Loudspeaker Compatibility
Although the Exposure 3010S Power Amplifier is able to drive almost any loudspeaker system, the best
results will most likely be achieved with speakers rated at 8 Ohms. For loudspeakers rated below 4 Ohms,
the use of two Exposure 3010S Power Amplifier operating in Mono mode should be considered. See sec-
tion on Operational Modes for further details.
Exposure Warranty Policy
1. The Exposure warranty entitles you to FREE repair of this unit for the first three (3) years
from the date of purchase.
2. This warranty is valid only if the unit is purchased from an authorised Exposure dealer,
registered with the authorised agent in your country of residence and issued with a
recognised warranty card.
3. The agent accepts no responsibility for defects arising from accident, misuse, abuse, wear
and tear, neglect or through unauthorised adjustment and/or repair or replacement of any
components, nor will they accept responsibility for damage or loss occurring during transit
to or from the person making a claim under the warranty.
4. The Exposure warranty covers:
• Parts and labour costs for three (3) years from the date of purchase. Please retain your
original receipt as proof of purchase and purchase date. The guarantee is extended only to
the original purchaser and is not transferable.
When making claims under this warranty:
1. The unit should be suitably packed and returned to the dealer from whom it waspurchased,
or directly to the local distributor, together with proof of purchase or a copy of the dated
sales receipt.
2. If necessary, the unit should be sent carriage pre-paid by a reputable carrier - NOT by post.
3. No responsibility is accepted for the unit whilst in transit to the dealer or agent, and
customers are advised to insure the unit against loss or damage whilst in transit.
4. The warranty card MUST be produced when making claims against this guarantee.
5. Any tampering or alteration made to the warranty card or to the serial number on the
unit will invalidate the warranty.
6. The dealer or the agent shall notify the customer when the repairs have been completed.
The customer must claim the unit within fourteen days from the date of notice, failing
which, the Company reserves the right to impose storage charges.
7. The Company reserves the right to dispose of the unit after 90 days from the date of
notice in a manner that it sees fit and without compensation to the customer.
Safety
Incorrect installation or inappropriate use of the Exposure 3010S Power Amplifier may result
in injury due to electrical shock.
• Ensure that the voltage rating on the rear panel of the unit matches that of your local
mains supply.*
• Ensure that the mains cable and plug supplied with this unit is also correct. (Contact your
dealer immediately if this is not the case)
• The unit is protected by a mains fuse, which is accessible as part of the IEC socket on the
rear panel.
• Fuse replacement specifications:
220/240V units T4A fuse
110/120V units T8A fuse
• Protect unit against all forms of liquid. Never expose unit to dripping or splashing, or place
objects filled with water, such as vases, on the device.
• Unplug unit from mains when not in use for prolonged periods.
• Do not open this unit - there are NO user serviceable parts inside.
• Reduce the volume control to minimum before turning the unit on or off.
• Ensure that the unit is switched off when connecting or disconnecting speaker and interconnect
cables.
* Contact your Exposure dealer or distirbutor for advice on moving your unit to another country
or territory.
Caution
For a long and trouble-free life of your Exposure 3010S Power Amplifier, please ensure the following:
• Do not short circuit the speaker terminals.
• Do not remove the cover of the unit or dismantle the case.
• Protect unit against all forms of liquid. Do not expose unit to dripping or splashing, or place
objects filled with water, such as vases, on the unit.
• Do not operate the unit in a damp environment or allow liquids to enter the unit.
• Do not attempt to bypass the mains fuse or replace the fuse with one of a different specification.
• Do not place the unit in a position which restricts cooling airflow around its case.
• Do not use abrasive or solvent-based cleaning fluids on the unit’s case.
Failure to observe these precautionary measures may void your warranty.
Technical Specifications
Power Output (Stereo):
110 Watts per channel at 1KHz into
8 Ohms
Input Impedance:
18K Ohms
Frequency Response:
20Hz – 20Khz ± 0.5dB
Total Harmonic Distortion:
<0.015% at rated output, ref 1 KHz
Signal to Noise:
>100dB ref rated output
Channel Separation:
>60dB, 20Hz - 20KHz
Mains Supply:
110/120V or 220/240V, 50/60Hz
(factory set)
Power Consumption:
<400VA, 8ohm load both channels
driven
Dimensions (H x W x D):
115 mm x 440 mm x 300 mm
Nett Weight (Unpacked):
12 kg
Gross Weight (Packed):
14 kg