Expolite TOURSTICK MC180, User Manual

Page: 28 / 38

28
ENGLISH
3.7
3.8
Enter the PERSONALITY mode to select DMX mode.
SETTING
...this menu allows the user to adjust key operation set-
tings for this fixture.
COLOR is for activate/unactivate the color calibration functions.
When RGBW is selected, on RGB = 255,255,255, the color is
displayed as calibrated in CALIB.C -- RGBW . When COLOR is set
OFF , on RGB = 255,255,255, the RGBvalues are not adjusted and
the output is most powerful. When UC is selected, the RGB output
are adjusted to a standard preset universal color which balances
fixtures from different generations.
NOTE: COLOR WORK ONLY WHEN CHOOSE NORMAL AT FULL
POWER CCT.
Select DIM1 , DIM2 , DIM3 or DIM4 for different dimming speeds.
( DIM4 is the slowest dimming speed).
DMX ERROR Choose SAVE in order to save the last DMX data
incase of DMX signal error. Choose BLACK in order to blackout in
case of DMX signal error.
PWM_RATE
is PWM reflesh rate bottom, press
UP/DOWN
to
choose 600 HZ , 1200 HZ , 2000 HZ , 4000 HZ , 25000 HZ .
NOTE: WITH REFLESH RATE INCREASED, GRAY RATE OF DIM-
MER WILL BE REDUCED, (THAT‘S MEANS HIGH REFLESH RATE,
LOW GRAY RATE), WHEN IT‘S 4000HZ,CV3 IS INVALID, WHEN
IT‘S 25000HZ, CV1 CV2 CV3 ARE INVALID, SO PLEASE LOWER
PWM RATE TO INCREASE GRAY RATE IN NECESSARY.
KEY
Function will lock the Display Access. For enetring the Dis-
playmenu the standard Password „UP+DOWN+UP+DOWN“ Enter
is needed.
NET SWITCH enables the internal ARTNET NODE .
IP-MODE will set DEFAULT or CUSTOM IP is used.
In CUSTOM IP SET the CUSTOM IP can be set.
DMX PERSONALITY
SPECIAL SETTINGS
MENU
PERSONALITY HSIC
PIXEL 1
PIXEL 2
TR16
HALO