Setting Runmode
The
operating mode
is
set in menu
STAND ALONE
, submenu
RUN
. For operation on a
DMX-controller
DMX512
needs to be set. To run an auto program choose
AUTO1
or
AUTO2
. In
mode
CUSTOM
it‘s possible to run a self created program. To run atest of all functions of the fixtures,
choose
TEST
.
SLAVE
set the fixture into slave mode.
MENU
MENU
Editing of user-defined programs
MENU
Info Menu
Step-by-step programming of the custom stand-alone programs with up to 50 different steps.
NOTE:
For less than 50 steps the
TIME
of the last step needs to be set to 0.
Example for time settings of a stand-alone programm with 3 steps:
Step 1
TIME
= 4
USE
= YES
Step 2
TIME
= 5
USE
= YES
Step 2
TIME
= 0
USE
= YES
Different operating data of the fixture can be monitored in the Info-Menu:
SYSTEM ERROR:
In this menu the user can find the error messages of the different sensors. It is
differed in errors in light barriers (ENCODER), hall sensors (RESET) and other sensors (SENSOR).
TEMPERATURE
: current temperature of the LED fixture.
VERSION:
installed software version of the fixture.
DMX512
STAND ALONE
RUN
AUTO1
AUTO2
CUSTOM
TEST
SLAVE
INFO
SYSTEM ERROR
TEMPERATURE
VERSION
V01
STAND ALONE
EDIT
STEP(01-50)
EDIT
PAN
TILT
RED
GREEN
BLUE
WHITE
DIMMER
STROBE
ZOOM
TIME
USE
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
YES
NO
E-38
