Setting Slave Mode
In the menu
SLAVE MODE
the fixture can be set into the
slave mode. In this mode the fixture is
controlled by a master unit on the same dmx-line.
MENU
PERSON
SLAVE MODE
HSIC
SLAVE
Setting DMX Error Response
In the menu
DMX STATE
is set how the fixture responses if DMX-signal gets lost. Set
DMX HOLD
to
hold the last received value or
BLACKOUT
for blackout.
MENU
PERSON
DMX STATE
HSIC
DMX HOLD
HSIC
BLACKOUT
Setting Dimmer Speed
In the menu
DMX CURVE
different dimming speeds can be chosen for example to simulate a
halogen bulb. (
CURV 1/CURV 2/CURV 3/CURV 4
).
MENU
PERSON
DMX CURVE
HSIC
CURV 1
HSIC
CURV 3
HSIC
CURV 4
HSIC
CURV 2
Miscellaneous Settings
MENU
The default password is: DOWN - UP - DOWN - UP - ENTER
Dimmer ALL:
limits the maximum brightness of the dimmer channel of the fixture.
BALANCE:
possibility to do a (white) colour calibration. This can be done by setting the values (
0 -
255
) for Red (
Dimmer RED
), Green (
Dimmer GREEN
) and Blue (
Dimmer BLUE
).
PERSON
HSIC
SETUP
Dimmer ALL
BALANCE
HSIC
Key locks
0 - 255
Dimmer GREEN
Dimmer RED
Dimmer BLUE
OFF
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
ON
HSIC
REMOTE
OFF
ON
HSIC
Display
30S
ON
HSIC
RESET
****
HSIC
REFRESH RATE
600HZ
1200HZ
4800HZ
9600HZ
30° - 70°
HSIC
Max temp
E-23
