Expolite TourLED City, User Manual, Page: 10 / 20

9 8
3.7 PERSONALITY
PERSONALITY
Enter the PERSONALITY mode to select DMX mode: TOUR , ARC.1 ,
AR1.D , ARC.3 , AR3.D , AR3.S , HSV or BLOC .
3.8 ID ADDRESS
ID
Enter the ID mode to set the ID ADDRESS.
ID
ID(01~66)
MENU
RUN
Enter the RUN mode to set working mode.
DMX mode is for using the DMX512 controller to control the fixtures.
SLAV mode is for Master -- Slave operation.
3.6 RUN MODE
RUN DMX
SLAV
MENU
TOUR
ARC.1
ARC.3
AR1.D
AR3.S
AR3.D
PERS
HSV
BLOC
MENU
3.9 SPECIAL SETTINGS
SET UPLD
ID.ON ON
OFF
REST
RGBW
COLOR
DIM1
DIM3
DIM2
DIM4 DIM
UC
OFF
OFF
PASS
PASS
SEND END
REST
END
MENU
SETTING
Select UPLD to upload the custom programs from the current MASTER unit to
the SLAVE units.
In order to activate the upload function the password must be entered.
Password is the same as the main access password.
When uploading the MASTER and SLAVE units will display YELLOW.
If an error occurs when uploading the MASTER and/or SLAVE units will display RED.
On successful uploading of the custom programs the MASTER and SLAVE units
will display GREEN.
In order to reset custom modes to default values select REST .
Enter ID in order to allow/disallow ID address function from the DMX512
controller.
COLOR is for activate/unactivate the color calibration functions.
When RGBW is selected, on RGB = 255,255,255, the color is displayed as calibrated
in CAL2 -- RGBW. When COLOR is set OFF , on RGB = 255,255,255, the RGB
values are not adjusted and the output is most powerful.
When [
UC ] is selected, the RGB output are adjusted to a standard preset universal color
which balances fixtures from different generations..
PR.01
PR.02
PR.10
SC.01
SC.02
SC.30
Red
Green
Blue
White
Strobe
Time
Fade
(0~255)
(0~255)
(0~255)
(0~255)
(0~20)
(0~255)
(0~255)
EDIT
MENU
3.10 EDITING CUSTOM PROGRAMS
EDIT CUSTOM
Enter the EDIT mode to edit the custom programs PR.01 to PR.10 .
Each custom program has 30 steps that can be edited.
Each step allows the creation of a scene using RED
Red , GREEN Green ,
BLUE Blue , WHITE White ,AMBER Amber , STROBE Strobe , TIME
Time & FADE Fade .
WT01
WT02
WT11
Red
Green
Blue
White
(0~255)
(0~255)
(0~255)
(0~255)
CAL1
MENU
CAL1
Enter the CAL1 to select white color of different color temperature.
There are 11 pre-programmed White colors can be edited by using Red ,
Green , Blue , White & Amber .
3.11 WHITES CALIBRATION
Amber
(0~255)
Amber (0~255)