31
ENGLISH
INFO
MANUAL
SERVICE
3.8
3.9
3.10
MENU
MENU
MENU
Push OK button into the information search mode in menu
INFO
, push
UP/DOWN to choose item. SYSTEM ERROR is the SYSTEM ERROR
information setting, in TEMPERATURE mode could check the fixture
temperature, in VERSION could check the version of the software.
Select RESET from the
MANUAL
menu ALL RESET menu, select
YES/NO to carry out full fixture reset PT RESET menu, select YES/
NO to carry out PAN/TILT reset.
Select CALIB.M from the
SERVICE
menu in order to calibrate the motors. Adjust
the values of the PAN/TILT/ZOOM motors in order to calibrate the start motor
position. Enter the RGBTOW to adjust the RGB parameter to make different
whites. When the new setting is activated, the DMX controller choose RGB
= 255,255,255 the white color will be made by the actual RGB values on the
RGBtoW. Enter the CALIB to select white color of different color temperature.
There are 11 pre-programmed White colors plus RGB TO WHITE and can be
edited by using RED , GREEN, BLUE & WHITE.
INFO
SYSTEM ERROR
TEMPERATURE
VERSION
V01
MANUAL
RESET
ALL RESET
PT RESET
YES
YES
NO
NO
SERVICE
CALIB. M
CALIB. C
RGB TO W
PAN
2700 K
4200 K
6500 K
RED
TILT
ZOOM
3200 K
5600 K
8000 K
GREEN
BLUE
00 - 255
00 - 255
00 - 255
00 - 255
00 - 255
Note:
if user want to circulate the created steps, please set the
last steps Time as 0.
For example, there are 3 steps, the setting should be like belowed:
Step 1 Time = 4 Use = Yes
Step 2 Time = 5 Use = Yes
Step 3 Time = 0 Use = Yes
