MENU
In the submenu
NETWORK
the network settings of the fixture can be set.
NET SWITCH
: activates (
ON
) or deactivates (
OFF
) the integrated ArtNet node.
IP MODE
: submenu for setting the ip-address. Users can choose between
DEFAULT IP
or
CUSTOM IP
. If set to
CUSTOM IP
the users needs to set a custom ip in the next step.
CUSTOM IP EDIT
: in this menu a user defined ip-address can be set.
UNIVERS
: the universe of the ArtNet node is set.
Activate Password Protection
In the menu
KEY
the password protection of the fixture is activated or deactivated. If set
ON
the
fixture is password protected when started. 30 seconds after the last setting the menu is locked
again. To be able to make changes in the menu the password
UP - DOWN - UP - DOWN - ENTER
needs to be typed in.
MENU
MENU
Calibration and Whiteadjustment
In the menu
SETTING\CALIB.CCT
the colour temperatures for the white values are stored.
In the submenu
WT
the colour temperatures for the white values are stored. These are mixed from
the parameters
RED
,
GREEN
,
BLUE
, and
WHITE
.
To reset the changes made to the colour temperature presets to factory default, the setting
CALIB.RESET
needs to be confirmed with the default password
UP - DOWN - UP - DOWN -
ENTER
In the menu
RGBtoW
a custom colour calibration is stored which limits the maximum brightness of
the colour channels
RED
,
GREEN
,
BLUE
at the DMX value "255".
NOTE
: The maximum value can be limited to 0. In this case, a colour channel does not respond
to a sent DMX value, which can be misinterpreted as a device error.
E-30
HSIC
SETTING
****
NET SWITCH
IP MODE
CUSTOM IP SET
UNIVERS
NETWORK
OFF
ON
DEFAULT IP
CUSTOM IP
XX.XX.XX.XX
XXX
HSIC
KEY
ON
OFF
****
WT
HSIC
CALIB.CCT
2700K
3000K
RED
GREEN
BLUE
WHITE
o
o
o
10000K
CALIB.RESET
****
RGBtoW
RED
GREEN
BLUE
R.(0-255)
G.(0-255)
B.(0-255)
W.(0-255)
R.(0-255)
G.(0-255)
B.(0-255)
