DMX Control Summary
Intensity
Flash intensity can be set from minimum (blackout) to maximum in all DMX
modes except 1 channel mode (where it is always at maximum intensity). A
special pixel mode enables the fixture to be used as a blinder, where the
intensity of blinder colour can be set.
Duration·
Flash duration can be set from 0 to 650 ms on 50 Hz power supplies, or 0 to
530 ms on 60 Hz power supplies in 3, 4, 6 or 7 channel DMX modes. Flash
duration is fixed in 1-channel DMX.
Rate
Flash rate can be set from 0 flashes per second to 25 flashes per second on 50
Hz power supplies or from 0 to 30 flashes per second on 60 Hz power supplies,
when the fixture is set to 3, 4, 6 or 7 channel DMX mode. The flash rate is also
controllable in 1-channel DMX mode.
Programmed Effects
Six programmed effects are available in 4 and 7 channel DMX modes. The
effects may be altered using the intensity, duration, and rate controls
DMX functions and values
1 Channel Mode
CH Values
Functions
1
0-255
Strobe rate(0-30HZ)
3 Channel Mode
CH Values Functions
1
0-255
Master Dimmer (0-100%)
2
0-255
Flash duration(0-full on)
3
0-255
Strobe rate(0-30HZ)
4 Channel Mode
CH Values
Functions
1
0-255
Master Dimmer (0-100%)
2
0-255
Flash duration(0-full on)
