24
ENGLISH
3.10
SETTING
..this menu allows the user to adjust key operation settings for
this fixture.
Select
UPLOAD
to upload the custom programs from the current MAS-
TER unit to the SLAVE units.
In order to reset custom modes to default values select
RESET
NOTE:
UC\RGBW\CALIB.C CAN´T RESET
COLOR
is for activate/unactivate the color calibration functions. When
RGBW is selected, on RGB = 255,255,255, the color is displayed as
calibrated in CALIB.C -- RGBW. When COLOR is set OFF, on RGB =
255,255,255, the RGBvalues are not adjusted and the output is most
powerful. When UC is selected, the RGB output are adjusted to a standard
preset universal color which balances fixtures from different generations.
NOTE:
COLOR WORK ONLY WHEN CHOOSE NORMAL AT FULL POWER
CCT
Select
DIM1, DIM2, DIM3 or DIM4
for different dimming speeds. (DIM4 is
the slowest dimming speed)
DMX ERROR
Choose SAVE in order to save the last DMX data incase
of DMX signal error.Choose[BLACK] in order to blackout in case of DMX
signal error.
PWM_RATE
is PWM reflesh rate bottom, press UP/DOWN to choose
<600Hz>¡<1200Hz>¡<2000Hz>¡<4000Hz>¡<25000Hz>
NOTE:
with reflesh rate increased, gray rate of dimmer will be reduced,
(that‘s means high reflesh rate, low gray rate), when it‘s <4000Hz>,CV3
is invalid, when it‘s <25000Hz>,CV1 CV2 CV3 are invalid, so please lower
PWM rate to increase gray rate in necessary.
FULL POWER CCT
is the color temperature choose bottom, press UP/
DOWN to choose, under full power, <3200K>¡<4200K>¡<5600K> can be
chosen, when
GERÄTEEINSTELLUNGEN
MENU
SETTING
****
****
****
OFF
OFF
SAVE
600 HZ
3200 K
2000 HZ
5600 K
NORMAL
6000 HZ
BLACK
1200 HZ
4200 K
2400 HZ
25000 HZ
RGB
DIM 1
DIM 3
UC
DIM 2
DIM 4
SEND
UPLOAD
RESET
COLOR
DIMMER
DMX ERROR
PVM
FULL POWER CCT
