Choose Run Mode
The
operating mode
is
set in menu
RUN
. For operation on a DMX-controller
DMX
needs to be
set.
SLAVE
sets the fixture into slave mode.
MENU
E-27
PERSON
RUN MODE
HSIC
DMX
HSIC
SLAVE
Miscellaneous Settings
MENU
The default password is: UP - DOWN - UP - DOWN - ENTER
UPLD:
sends the user settings to connected slave fixtures.
RESET:
sets all editable settings back to factory default.
DIMMER:
controls different dimming speeds to simulate a halogen bulb (
DIM4/DIM3/DIM2/DIM1/
OFF
).
DMX ERROR:
sets how the fixture responses if DMX-signal gets lost. Set
SAVE
to hold the last
received value or
BLACK
for blackout.
PERFORMANCE:
gives the user the opportunity to change the performance of the fan between
LIVE
,
STUDIO
and
POWER
. In
STUDIO
mode the fan is run on low noise. In case of overheat the
intensity of the led module is regulated down. In
LIVE
mode, fan speed and the intensity of the led
module is balanced with each other to reach the best output with as low fan speed as possible. In
POWER
mode the temperature of the fixture is primary regulated by the fan, to keep a high intensity
as long as possible.
PWM:
gives the user the possibility to adjust the PWM frequency of the leds (
600Hz/1200Hz/2000Hz
/
4000Hz
/
6000Hz
/
25000Hz
).
FULL POWER CCT:
sets the colour temperature at maximum output.
3200K/4200K/5600K/10000K
and
NORMAL
can be set.
PERSON
SETTING
HSIC
RESET
HSIC
DIMMER
HSIC
DMX ERROR
HSIC
PERFORMANCE
****
DIM4
DIM3
DIM2
DIM1
OFF
SAVE
BLACK
LIVE
STUDIO
HSIC
SEND
UPLOAD
****
****
HSIC
RESET
POWER
HSIC
PWM_RATE
600HZ
1200HZ
2000HZ
4000HZ
6000HZ
25000HZ
HSIC
FULL POWER CCT
3200K
4200K
5600K
10000K
NORMAL
