MENU
Miscellaneous Setting
PERSON
SET
HSIC
DIMX
HSIC
CURV
HSIC
DERR
HSIC
SLCK
OFF
DIM1
DIM2
DIM3
OFF
Cv1
Cv2
Cv3
SAVE
BLAK
OFF
ON
HSIC
KEY
OFF
ON
DIM4
HSIC
REST
****
HSIC
SEND
****
HSIC
OK
REST
HSIC
PERF
LIVE
STDO
POWR
HSIC
MCON
SELF
MAST
The default password is: UP - DOWN - UP - DOWN - ENTER
KEY:
activates or deactivates the password protection of the fixture. If set
ON
the fixture is password
protected when started. 30 seconds after the last setting the menu is locked again. To be able to
make changes in the menu the password
UP - DOWN - UP - DOWN - ENTER
needs to be typed in.
DIMX:
controls different dimming speeds to simulate a halogen bulb (
OFF/DIM1/DIM2/DIM3/
DIM4)
.
CURV dimming
1: OFF
2: Cv1
3: Cv2
4: Cv3
1
2
3
4
(100%)
CURV:
In curve menu, the dimmercurves are set as shown below.
PERF:
gives the user the opportunity to change the performance of the fan between
LIVE
,
STDO
and
POWR
. In
STDO
mode the fan is run on low noise. In case of overheat the intensity of the led
module is regulated down. In
LIVE
mode, fan speed and the intensity of the led module is balanced
with each other to reach the best output with as low fan speed as possible. In
POWR
mode the
temperature of the fixture is primary regulated by the fan, to keep a high intensity as long as possible.
SLCK:
Settings Lock. In this menu is set whether the menu
SET
is only accesable after entering the
password (
ON
) or without a password (
OFF
). Default password is
UP - DOWN - UP - DOWN -
ENTER.
DERR:
sets how the fixture responses if DMX-signal gets lost. Set
SAVE
to hold the last
received value or
BLAK
for blackout.
E-18