Setting DMX-Address
The DMX start address of the fixture is set in the menu
ADDR
. This is retained even when changing
the personality.
MENU
Setting DMX-Personality
MENU
The personality is set in the menu
SET
, submenu
PERS
. There are three different modes which can
be choosen:
UNO
(1 channel),
DOS
(2 channels),
STD.P
(5 channels).
Editing Static Scene
A static scene for stand-alone operation can be set in
STAT
. These are mixed using
DIM
and
ZOOM.
Furthermore dimmer and zoom can also be controlled manually via the dim- and zoom-encoder
above the display. To use this function the appropriate encoder needs to be pushed twice. If
dmx-signal is pending the fixture switches back to dmx control after two minutes without using the
encoder.
MENU
E-16
PERSON
HSIC
ADDR
D.(001 - 512)
PERSON
SET
HSIC
PERS
UNO
DOS
STD.P
PERSON
STAT
HSIC
DIM
ZOOM
0 - 100
0 - 100
Choosing Run Mode
The
operating mode
is
set in menu
RUN
. For operation on a DMX-controller
DMX
needs to be
set.
SLAV
sets the fixture into slave mode.
MENU
PERSON
RUN
HSIC
DMX
HSIC
SLAV
PERSON
RUN
HSIC
DMX
Reseting Zoom-Motor
In the menu
MOTR
the zoom-motor of the fixture can be reset (
YES
).
MENU
HSIC
YES
PERSON
MOTR
HSIC
NO
