E-20
Info-Menü
MENU
Submenu Software:
shows current firmware version of the fixture.
Submenu Hardware:
show current hardware versions of the fixture.
Submenu Fix times:
shows current working time of the fixture.
PERSON
INFORMATION
HSIC
Software
HSIC
Hardware
HSIC
Fix times
00
VX.X.X.
HX.X.X.
XXXXXh XXm
Miscellaneous Settings
MENU
Password: DOWN - UP - DOWN - UP - ENTER
ID number:
sets ID of the fixture.
Display Led:
sets if display illumination is always on (
ON
) or switches off automatically 10 seconds
after last display input (
OFF
).
Key locks:
In this menu the password protection of the fixture is activated or deactivated. If set
ON
the fixture is password protected when started. 30 seconds after the last setting the menu is locked
again. To be able to make changes in the menu the password
DOWN - UP - DOWN - UP - ENTER
needs to be typed in.
Max temp:
gives the user the possibility to set the max. acceptable temperature of the led unit,
before the intensity of the fixture is reduced.
NOTE:
A high max. acceptable temperature can reduce the life span of the led unit.
Dimmer CW/WW/ALL:
limits the maximum brightness at the DMX value "255" for cool white
(
Dimmer CW
), warm white (
Dimmer WW
) or both values (
Dimmer ALL
).
NOTE:
The maximum value can be limited to 0. In this case, a dimmer channel does not respond
to a sent DMX value, which can be misinterpreted as a device error.
PERSON
SETUP
HSIC
ID number
1-66
HSIC
Display Led
ON
OFF
OFF
On
HSIC
Key locks
HSIC
Max temp
****
002-120
HSIC
Dimmer CW
0-255
HSIC
Dimmer WW
HSIC
Dimmer ALL
0-255
0-255
