1. Remove the temperature controller’s
faceplate: Teca B – Dune.
1. Unscrew the probe guard from the left
middle panel.
4. Release the two fixing screws.
4. Cut the fixing ties of the probe cable.
2. Remove the temperature controller’s
faceplate: Teca.
2. Cut the ziptie fixing the probe’s head.
5. Slide temperature controller out.
5. Take out temperature controller by following
points G1-G5.
3. Remove the temperature controller’s
faceplate: Teca M
3. Push the probe’s head into the hole in the
tray.
6. Disconnect cables one at a time and connect
them to new temperature controller.
6. Disconnect faulty probe and connect new one.
G. TEMPERATURE CONTROLLER REPLACEMENT
H. PROBE REPLACEMENT IN INTERNAL COMPARTMENT
(FOLLOW POINT A FIRST)
