![Expo Börse 613-401326 Instruction Manual Download Page 5](http://html1.mh-extra.com/html/expo-borse/613-401326/613-401326_instruction-manual_2452132005.webp)
5
GB
DE
KETTLE BARBECUE
Introduction
To get the most out of your new barbecue,
please read through these instructions
before use. We also recommend that you
save the instructions in case you need to
refer to them later.
Technical data
Material:
enamelled steel
Diameter:
43 cm
Height:
72 cm
With 4 legs, 2 wheels and wire shelf
Special safety instructions
• Do not use the barbecue in a con� ned
and/or habitable space e.g. houses,
tents, caravans, motor homes, boats.
Danger of carbon poisoning fatality.
• Warning. This barbecue will become
very hot, do not move it during
operation.
• Warning. Keep children and pets away.
• Warning. Do not use spirit or petrol
for lightning or re-lightning! Use only
� relighters complying to EN 1860-3.
• Do not use indoors.
The barbecue should be placed on a � rm,
level surface before being lit.
This surface must be non-� ammable, e.g.
� agstones, paving stones or packed earth.
There must be no � ammable objects such
as grass, plants or rubbish under or near to
the barbecue.
We recommend lighting the barbecue and
leaving the briquettes glowing red for at
least 30 minutes before you start cooking.
Do not cook before the fuel has a coating
of ash.
NEVER pour lighter � uid, petrol, paraffi n or
other � ammable liquids onto the barbecue
while it is hot! Doing so can cause � ames or
explosions, which can result in very serious
burns!
Do not dispose of embers and hot ash from
the barbecue in rubbish sacks.
Use separate cooking utensils for raw and
cooked meat. Keep them separate to avoid
transfer of bacteria to the cooked meat and
the risk of food poisoning.
Assembly
Please refer to the illustrations at the back of
these user instructions.
1. Screw the handle (16) securely to the
outside of the lid (1), and screw the lid
holder (17) securely to the inside of the
lid using screws (15), washers (18) and
nuts (19).
2. Screw the handles (22) securely to the
kettle (4) using 2 screws (23) and 2 nuts
(24) on each side.
3. Place one leg holder (5) on each leg (6,
7) and screw the legs onto the kettle
using screws (20) and washers (21).
Please note that one handle (22)
must be between the 2 short legs (6),
and that the second handle must be
between the 2 long legs (7).