• Depending on where you put the infrared heater, there is a risk that the awning
valance will get closer than 10 cm to the infrared heater when the awning is
being closed. You therefore have to make sure that the infrared heater has been
switched off and has cooled down before closing the awning.
Cleaning and maintenance
Important information when deciding where to put your heater and when us-
ing it:
• Remember that the infrared heater will get very hot when it is on, including
the top and back of the heater. You should therefore make sure that it is a safe
distance, a minimum 10 cm from other objects.
• Hang the infrared heater in a safe location. Make sure it is high up, somewhere
where no-one can walk into it, and where it is out of the reach of children.
• The infrared heater must be at least 10 cm away from other objects, as the heat
can damage or discolor fabric or other objects nearby.
• Remember to always switch off your infrared heater when it is not in use (pull
the cord of the main switch). Pull out the plug and make sure the infrared heater
has cooled down before leaving it unsupervised.
Cleaning and storage
• You need to clean the infrared heater regularly and before you store it away.
• Switch off the infrared heater by pulling the cord (main switch) and then pull the
plug out of the electric socket. Allow it to cool before cleaning and storing it.
• Use a dry cloth to clean the casing. Do not use water, wax, polish or other clean-
ing agents.
• Store the infrared heater in a dry and well ventilated place.
Safety instructions
• Read the user manual carefully before using the heater for the first time and save
it for future reference.
• Remember that the infrared heater will get hot when it is switched on. Do not
touch any of the hot surfaces.
• Pay particular attention when using the infrared heater close to children.
• Do not leave the infrared heater unsupervised when it is switched on.
18