Explorer GT 50, Service And Maintenance Manual

Page: 95 / 112

98
REASSEMBLY AND REMOUNTING
Reassemble and remount the rear wheel and brake in the
reverse of removal, and also carry out the following steps:
႒
Turn the punched mark
཰
on the camshaft to the
rear axle shaft side.
႒
Install the protrusion
ཱ
of indicator plate to the groove
ི
of Camshaft.
႒
When installing the brake cam shaft, aligh the groove
ཱི
of
camshaft with the slit
ུ
of on cam shaft.
႒
When installing brake shoes, be sure to daub camshaft
with adequate grease.
CAUTION:
Be careful not to daub the camshaft with too much grease.
If grease gets on the lining, brake effectiveness will be lost.