Figure 1
Revision
Figure 1: Telescope parts overview
1. Focusser with 10:1 reduction
2. Secondary cage unit with secondary mirror
3. Collimation-tool for the main mirror
4. Trusses
5. Altitude wheels
6. Rockerbox
7. Lid mirror box
8. Mirror box
9. Red dot finder
Revision
10. 1” Focuser Extension
11. Clutch
The revision consists of the clutch and the 4mm
hex screw with the plastic sleeve. The center
rocker knob will be replaced with the hex screw
and sleeve
(
Figure 2
)
. This will allow for the
installed clutch to ride against rocker without hitting
any knobs. The clutch is installed on the rocker
box on the center threaded hole above the center
of the handle
(
Figure 3
)
. The clutch is with the
teflon to the rocker side and set to the up position.
Figure 2
Figure 3
Summary of Contents for Truss Tube Dobsonian Series
Page 4: ......
