CHAR
GE
CHAR
GE OK
ST
ATUS DISPLA
Y
4
2
Inside View
A
B
1
CHAR
GE
CHAR
GE OK
ST
ATUS DISPLA
Y
Finished Charging
Charging
(When Connected)
LED
LED
LED
Power on - Idle
How To Connect And Operate your
LiFePO4 Smart Charger
Insure that the XLR connector is free of any foreign
metal objects or other debree such as lint.
If needed, the XLR connector can be connected to a
Female Inline Connector.
Before Starting
1
Once you’ve followed the precautions on step 1, plug
the AC cord directly to your AC wall outlet. The
LED
will
light up
Green
when connected to the outlet.
Please read Warnings and Safety on other side of this
manual if you plan on using an
extension cord
.
Connecting to AC Power
Charging The Battery
2
4
The Smart Charger automatically implements the 0V
reset if necessary and the special 2-stage constant
current/constant voltage (CC/CV) charge algorithm.
The LED indicator will track its progress. When
LED
turns
Green
your battery has finished charging.
DO NOT LEAVE UNATTENDED.
Disconnect charger
from battery first then unplug from the wall outlet.
(562) 630 - 3002
Visit us at:
ExpertPower.us
6437 Alondra Blvd
Paramount, CA 90723
For Questions
And Support
Operation Instructions
3
OR
Connecting to Battery
3
Make sure that you are charging the correct battery
type for this charger.
Locate the female XLR Input on the device that
supports this type of charger.
Connect the male XLR connector to the corresponding
female connector.
Connect the male XLR to the Inline female connector.
Connect the Inline female connector to the
corresponding male connector.
A
B
