How To Connect And Operate your
LiFePO4 Smart Charger
3
1
Finished Charging
Charging
(When Connected)
LED
LED
LED
Power on - Idle
2
4
Insure that the two alligator clips are separated, not
touching each other, and that they are not touching
any foreign metal objects or near flammable materials.
Before Starting
Connecting to Battery
1
3
Make sure that you are charging the correct battery
type for this charger.
First, connect the
BLACK
Alligator Clip to the
Negative (–) Terminal.
Then, connect the
RED
Alligator Clip to the
Positive (+) Terminal.
LED
will turn
RED
to indicate charging is starting.
Once you’ve followed the precautions on step 1, plug
the AC cord directly to your AC wall outlet. The
LED
will turn
Green
when connected to the outlet.
Please read Warnings and Safety on other side of this
manual if you plan on using an extension cord.
Connecting to AC Power
Charging The Battery
2
4
The Smart Charger automatically implements the 0V
reset if necessary and the special 2-stage constant
current/constant voltage (CC/CV) charge algorithm.
The LED indicator will track its progress. When
LED
turns
Green
your battery has finished charging.
DO NOT LEAVE UNATTENDED.
Disconnect charger
from battery first then unplug from the wall outlet.
(562) 630 - 3002
Visit us at:
ExpertPower.us
6437 Alondra Blvd
Paramount, CA 90723
For Questions
And Support
Operation Instructions
