background image

EX9132C-2-MTCP 

Manual 

www.expertdaq.com 

EX9132C-2-MTCP • Manual Version 1.1 • 21.09.2015 

Page 3 

1

 

Introduction 

We provide new ways of connecting legacy serial devices to a Local Area Network (LAN) or Wide Area Network (WAN). 

Modbus TCP/IP converters are designed to operate serial ports over 100M bps Ethernet networks. The data is 

transmitted via Modbus TCP/IP protocol. Therefore, control is available via Ethernet, Intranet and Internet. EX9132C-2-

MTCP converter is packaged in a PVC material case well suited for industrial environments. It provides two serial ports 

one is a RS232 and another is RS232/RS422/RS485 (Auto-Detect). All serial ports operate in common industrial 

configuration. 
EX9132C-2-MTCP converter is a low-cost, high performance design. By carefully selecting high quality with competitive 

prices components in the world, the products made network connectivity possible with affordable cost for virtually all 

kinds of devices. 
EX9132C-2-MTCP is a serial device server with two serial ports as one is a RS232 port and another is a 

RS232/RS422/RS485 (Auto-Detect) port and it provides one socket connection port. This operation manual will guide 

you step by step to learn the various functions of the EX9132C-2-MTCP converter. 
The following topics are covered in this chapter: 

 

Overview  

 

Block Diagram  

 

Product Features  

 

Product Specifications  

1.1

 

Overview 

EX9132C-2-MTCP

 converter is designed to make your industrial serial devices Internet ready instantly. 

ARM Cortex-M3

 

CPU of EX9132C-2-MTCP converters makes them the ideal choice for connecting your RS232 and RS422 or RS485 serial 

device—such as PLCs, meters, and sensors—to an IP-based Ethernet LAN, making it possible for your software to access 

serial devices anywhere and anytime over a local LAN or the Internet. 
ARM Cortex-M3 CPU Series converters ensure the compatibility of network software that uses a standard network API 

(Winsock or BSD Sockets) by providing TCP Server Mode, TCP Client Mode, and UDP Mode. Model EX9132C-2-MTCP 

provides 1 socket connection for remote management. ARM Cortex-M3 CPU Series Virtual COM driver and software 

that works with COM port can be set up to work over a TCP/IP network in no time. This excellent feature preserves your 

software investment and let you enjoy the benefit of networking your serial devices instantly. 
ARM-Cortex-M3 CPU series converter supports manual configuration via the handy web browser console and many 

protocols including TCP, IP, UDP, HTTP, DHCP, ICMP, and ARP. They are the best solution to network your serial devices. 

1.2

 

Package Checklist 

ARM-Cortex-M3 CPU products are shipped with the following items: 

 

1 unit of EX9132C-2-MTCP converter 

 

1 unit of Power Adaptor/Supply(9V/12V/24VDC, 500mA): Optional 

 

Quick Installation Guide in Documentation & Software CD 

 

Din Rail Mounting Kit: Optional 

Summary of Contents for EX9132C-2-MTCP
























Reviews: