13
Expert Electronics
2018
transceiver will provide a PC with the correct IP address, so you don't have to adjust network
card settings. In this mode, LED will become stable
orange
. in this mode, the transceiver will
also have a static IP address 192.168.16.225.
3. DHCP Client is for connection of the transceiver to the home local network, where you
have a DHCP-server, which automatically provides IP addresses, for example, router or
ADSL-modem. In this mode, LED will become stable
green
.
4. Static IP, in this mode transceiver, has a static IP address, works the same as in
SunSDR2PRO - in this mode LED will become stable
orange
. By default, IP address is
192.168.16.225. This mode requires to set up PCs network card according to the same
instruction as for SunSDR2PRO. We do not recommend to use this mode without special
need.
Note: if you have a direct connection, after initialization process you may change a network
mode to DHCP Server, this will save you about 20 seconds after switching on.
9. Regulatory requirements
We Expert Electronics LLC declare that SunSDR2 QRP transceiver has been tested in
accordance to essential protection requirements of the R&TTE Directive 1999/5/EC on the
approximation of the laws of the Member States relating to Radio Spectrum Matters and
found the test results meet the limitation of the relevant test standard(s) listed below:
EMC
EN 301 489-1: V 1.9.2 (2011)
EN 301 489-15: V 1.2.1 (2002)
Radio Spectrum
EN 301 783-1: V 1.2.1 (2010)
EN 301 783-2: V 1.2.1 (2010)
Type of Equipment: Base Station
The system is to be operated in accordance with the laws of the telecommunications
regulatory agency in the country of use. A license is required to use this equipment, and the
operator must comply with the national frequency allocations for the county of use.
Expert Electronics LLC confirms that we place on the market products sourced from
suppliers who have confirmed that their products are RoHS compliant. Expert Electronics
LLC declares that this equipment complies with the restriction of the use of certain hazardous
substances in electrical and electronic equipment.
