169
MB1 User Manual
© 2016 Expert Electronics
TRANSCEIVER OPERATIONS
Select, with the mouse or with your finger via the touch-screen, any function RX ANT, TX ANT,
RX A1...RX A4 in the pop-up menu for the f unct ional but t ons F1-F10. After selecting the
certain function you can control the antenna switch by pressing the f unct ional but t ons F1-
F10 on the front panel of the transceiver (more details in
).
7.27 Using RX IN input
You can enable the receiver's direct input via the FRONT END SETTI NG S local panel.
Press and hold the ANT or ATT button to open the panel.
RX I N - Receiver's direct input enable button (high-speed ADC input).
Press the RX I N button to enable the receiver's direct input, which can be used with receive
antennas, external filters, UHF, converters (more details in
).
7.28 Using RX OUT output
You can enable the receiver's HF path output via the FRONT END SETTI NG S local panel.
Press and hold the ANT or ATT button to open the panel.
RX OUT - Receiver's HF path output enable button (antenna output via band filters,
attenuators).
Press the RX OUT button to enable the receiver's HF path output, which can be used with
additional external filters, UHF, converters etc (more details in
.
170
26
26
