TURNING ON THE SERVICE MODE WITH THE IGNITION KEY
If the service button is not installed, turn the ignition ON two times. Shortly
after the system LED starts flashing double flashes, count until the number of
double flashes (1 double flash = 1 unit) corresponds with the first digit of the
PIN code. Turn the ignition OFF for a short time and turn it ON again. Count
the double flashes until the number corresponds with the second digit of the
PIN code. Turn the ignition key OFF and ON again. Enter the remaining two
digits of the PIN code in the same way. After correctly entering all four digits of
the PIN code, the LED flashes quickly (permanently or intermittently).
If you make a mistake while entering the PIN code, turn OFF the ignition,
and follow all over again.
TURNING OFF (EXIT) THE SERVICE MODE
Enter the PIN code and enter the code '11' within 8 minutes of the previous
step. Or simply press the button on the correct ID card.
Notes
1.
IF the ID card battery is low the system generates a series of 5 double
buzzer signals with ignition is turned ON
.
2.
If the ID card is placed outside the communication area it is impossible
to change the feature status, it is available to turn OFF the ID card,
however it is not available to turn it ON
.
