Getting Started
1.
Connect LED Strips to the LED output RJ45 cable.
Note: Each LED Strip comes with a 3mtr link cable to connect to the next strip. A maximum
of 5 x 1mtr LED Strips can be connected to one IRiS LED Strip Driver.
2.
Connect the XLR connector on the transformer supplied into the socket on the side of the
unit.
3.
Connect the standard plug to a mains outlet.
4.
The LED Strip(s) will now illuminate and scroll through the standard IRiS colours before going
out.
5.
Now it’s ready to use.
6.
Decide which Talker you want to control the IRiS LED Strip Driver with then go to the Pairing
section.
Pairing to IRiS Talkers
This procedure is split into 2 sections, one for those who do not have an IRiS Master Pairer and for
those who do.
Without an IRiS Master Pairer
Every IRiS Listener has a button on it called a pairing button. To get the IRiS LED Fibre Optic
Lightsource to work with a product, first turn on the IRiS LED Strip Driver then decide which IRiS
Talker you want to control it with – in this example we use the IRiS Qube but all work in the same
manner.
Next find the pairing button on the back of the unit and press it. You then need to activate the IRiS
Qube within 5 seconds (in this case you would turn the Qube over). The IRiS LED Strip Driver will now
change colour every time you turn the Qube if correctly paired, if it does not then repeat the above.
With an IRiS Master Pairer
To get the IRiS LED Fibre Optic Lightsource to work with a product, first turn on the IRiS LED Strip
Driver then decide which IRiS Talker you want to control it with – in this example we use the IRiS
Qube but all work in the same manner. Then find the button on the IRiS Master Pairer that
corresponds with it and press it. You then need to activate the IRiS Qube within 5 seconds (in this
case you would turn the Qube over). The IRiS LED Strip Driver will now change colour every time you
turn the Qube if correctly paired, if it does not then repeat the above.
