6.
Gantry Assembly:
Parts Needed:
Motor Bracket Assembly, 1x
X Carriage Assembly, 1x
Extruder Bracket Assembly, 1x
Support Bracket Assembly R, 1x
Support Bracket Assembly L, 1x
End-Stop Assembly, 1x
Left Side ExoSlide Assembly, 1x
ExoBracket, 2x
M4x14 bolt, 4x
Notes:
-The left side ExoBracket should be placed 32mm from the end of the extrusion (this does not
need to be exact, 30mm is ok, and you can use a 30mm bolt to gauge).
-The left motor mount should butt-up again the left side bracket. One M3 bolt head is covered
by the 2020 X rail.
-The right side ExoBracket should be flush with the extrusion for now. It will get positioned in a
following step.
