User’s Manual
http://www.exoatletasia.com
ExoAtlet
Ⓡ
II
59 / 84
Ver 1.0 (2019.03.29.)
Figure 65
Step-by-step mode:
after pressing “Walking” button there will 1 short beep
showing that exoskeleton got into step-by-step walking mode. In order to make
one step you should press the button on the left handle of exoskeleton. After 3
beeping signals exoskeleton will make a first step from the left leg and will stop
in this pose. You will be able to see the chosen mode in the bottom side of
“Training” section. To make a next step you should press the button on the left
handle again and exoskeleton will make a step right after pressing (without 3
signals). All the next steps will be also initiated without additional signals (in case
of Sound indication is not activated). To stop walking and make a final step you
should hold the button on the left handle and after 1 second exoskeleton will
make a final step and get into standing pose. After finished, it will beep one
more time to show that device is ready for the next motion. If you will hold the
button before making first step exoskeleton will immediately get into standing
pose and wait for the next motion.
Warning
: in this mode you will not be able to initiate or stop motion using
Tablet PC.
By effort mode:
When you first choose this mode in “Walking” settings “Effort”
screen will appear (see Figure 66). You should choose the degree of effort on
every limb that patient should perform in order to initiate a step from 0% (no
efforts from the patients, operation is similar to continuous mode) to 100% (it is
necessary to apply very serious effort in order to initiate movement).