g242180
Figure 8
1.
Blower
3.
Mower frame
2.
Belt cover
3.
Push down on the back of the cover and slide it
backwards under the blower.
4.
With the belt cover resting on the deck, slide it
forward until it is seated under both lips on the deck.
g009341
Figure 9
1.
Blower
3.
Deck lip
2.
Belt cover
5.
Install the knob and its hardware.
Installing the Hopper Assembly
1.
Lay the hopper assembly down behind the machine.
Pick up the bagger frame legs and hook the notch
onto the lower bagger mount bar as shown in
Figure 10.
g242492
Figure 10
1.
Lower bagger mount bar
2.
Frame leg
2.
Lift the hopper assembly and pivot it upward towards
the back of the machine. Attach the rod support to
each side of the rear frame as shown in Figure 11.
g242046
Figure 11
Right side shown
1.
Rod support assembly
4.
Mount pin with lanyard
2.
Bagger pin
5.
1/2 inch lock nut
3.
Washer
3.
Raise the hood and install the bag assemblies by
sliding the bag frame hooks onto the retaining slots
on the hopper frame.
4.
Close and latch the hood.
5
