ULTRAVAC
®
BAGGER
126-8680
Setup Instructions
For Ultravac Serial Nos. 406,294,345 & Higher
(To fit Lazer Z Diesel Units Serial Nos. 790,000 & Higher)
Important:
Due to the added weight of the Ultravac, it is important to ensure the parking brake on your
mower is adjusted properly. Before installing the Ultravac, make sure to re-adjust the parking brake on
your mower as outlined in the “Adjusting the Parking Brake” procedure in the Maintenance section of
the mower Operator's manual.
Loose Parts
Use the chart below to verify that all parts have been shipped. Part numbers not shown are available on the dealer
extranet.
Dealer Pack
Part No.
Description
Qty.
Use
—
Fill out the online warranty registration
form.
Literature Pack
Manual-Operator's
Models and Required Completing Kits
Completing Kits
Note:
Use the following charts to verify the kits required for the machine you are installing the UltraVac on.
Deck
Completing Kit
80T-60 (60 inch deck with 80T Engine)
126-8675
80T-72 (72 inch deck with 80T Engine)
126-8677
88C-60 (60 inch deck with 88C Engine)
126-8676
88C-72 (72 inch deck with 88C Engine)
126-8678
© 2019—Exmark Mfg. Co., Inc.
2101 Ashland Ave
Beatrice, NE 68310
Part No. 4504-789 Rev. A
Printed in the USA.
All Rights Reserved
*4504-789* A
