Operation
g006795
Figure 6
1.
Latch is in the drive
position
6.
Neutral lock
2.
Rotate forward for park
brake position
7.
Forward — release drive
lever
3.
Rotate back for neutral
lock position
8.
Neutral —hold in this
position
4.
Park brake
9.
Reverse—squeeze drive
lever
5.
Full speed forward
•
For ECS Handles
To lock the drive levers in “neutral lock”, squeeze
the drive levers to the “neutral” position. See
Figure 7 position 2. Place thumbs on the inner
thumb lobe of the neutral lock /park brake latches
and rotate them to the “neutral” position. See
Figure 7 position 3. Release the drive levers.
To lock the drive levers in “park brake”, squeeze
the drive levers farther to the “brake” position.
Place thumbs on the inner thumb lobe of the
neutral lock/park brake latches and rotate them
to the “park” position. See Figure 7 position 4.
Release drive levers.
CAUTION
If the neutral lock/park brake latches are
not completely engaged the drive levers
could unexpectedly slip into the forward drive
position. If the drive levers slip into the drive
position, the unit could lurch forward and
cause injury or property damage.
Be sure the drive levers are securely seated at
the bottom of the “neutral” or “park” areas of
the neutral lock latches.
To place the drive levers in the “drive” position,
slightly squeeze the drive levers while placing
thumbs on the outer thumb lobe of the neutral
lock/park brake latches (or the index finger on
the front lobe) and rotate them from under the
drive levers. Slowly and carefully release the drive
levers. See Figure 7 position 1.
g217846
Figure 7
Left ECS Handle Shown
1.
Drive Lever in drive
position
3.
Drive Lever locked in
neutral position
2.
Drive Lever in neutral
position
4.
Drive Lever locked in
park position
Driving Forward
1.
With drive levers in the “neutral” or “park brake”
position, shift transmission into desired gear.
2.
Squeeze both drive levers and move both neutral
lock/park brake latches from the “neutral” or
“park brake” position to the “drive” position.
3.
To move forward in a straight line, smoothly
release both drive levers to engage drive wheels.
To turn left or right, squeeze the right hand drive
lever to turn right and the left hand drive lever
to turn left.
Squeeze drive levers all the way back to engage
brakes. Move neutral lock/park brake latches into
the “park brake” position and release drive levers.
Shift transmission into neutral.
Driving in Reverse
20
Summary of Contents for METRO 346
